Chapter 14. Directory Servers

14.1.1. Introduction to LDAP
14.1.2. Installing the OpenLDAP Suite
14.1.3. Configuring an OpenLDAP Server
14.1.4. Running an OpenLDAP Server
14.1.5. Configuring a System to Authenticate Using OpenLDAP
14.1.6. Additional Resources

14.1. OpenLDAP

LDAP (Lightweight Directory Access Protocol) is a set of open protocols used to access centrally stored information over a network. It is based on the X.500 standard for directory sharing, but is less complex and resource-intensive. For this reason, LDAP is sometimes referred to as “X.500 Lite”.

Like X.500, LDAP organizes information in a hierarchical manner using directories. These directories can store a variety of information such as names, addresses, or phone numbers, and can even be used in a manner similar to the Network Information Service (NIS), enabling anyone to access their account from any machine on the LDAP enabled network.

LDAP is commonly used for centrally managed users and groups, user authentication, or system configuration. It can also serve as a virtual phone directory, allowing users to easily access contact information for other users. Additionally, it can refer a user to other LDAP servers throughout the world, and thus provide an ad-hoc global repository of information. However, it is most frequently used within individual organizations such as universities, government departments, and private companies.

This section covers the installation and configuration of OpenLDAP 2.4, an open source implementation of the LDAPv2 and LDAPv3 protocols.

14.1.1. Introduction to LDAP

Using a client/server architecture, LDAP provides reliable means to create a central information directory accessible from the network. When a client attempts to modify information within this directory, the server verifies the user has permission to make the change, and then adds or updates the entry as requested. To ensure the communication is secure, the Secure Sockets Layer (SSL) or Transport Layer Security (TLS) cryptographic protocols can be used to prevent an attacker from intercepting the transmission.

Using Mozilla NSS

The OpenLDAP suite in Fedora 16 no longer uses OpenSSL. Instead, it uses the Mozilla implementation of Network Security Services (NSS). OpenLDAP continues to work with existing certificates, keys, and other TLS configuration. For more information on how to configure it to use Mozilla certificate and key database, refer to How do I use TLS/SSL with Mozilla NSS.

The LDAP server supports several database systems, which gives administrators the flexibility to choose the best suited solution for the type of information they are planning to serve. Because of a well-defined client Application Programming Interface (API), the number of applications able to communicate with an LDAP server is numerous, and increasing in both quantity and quality.

14.1.1.1. LDAP Terminology

The following is a list of LDAP-specific terms that are used within this chapter:

entry

A single unit within an LDAP directory. Each entry is identified by its unique Distinguished Name (DN).

attribute

Information directly associated with an entry. For example, if an organization is represented as an LDAP entry, attributes associated with this organization might include an address, a fax number, etc. Similarly, people can be represented as entries with common attributes such as personal telephone number or email address.

An attribute can either have a single value, or an unordered space-separated list of values. While certain attributes are optional, other are required. Required attributes are specified using the objectClass definition, and can be found in schema files located in the /etc/openldap/slapd.d/cn=config/cn=schema/ directory.

The assertion of an attribute and its corresponding value is also referred to as a Relative Distinguished Name (RDN). Unlike distinguished names that are unique globally, a relative distinguished name is only unique per entry.

LDIF

The LDAP Data Interchange Format (LDIF) is a plain text representation of an LDAP entry. It takes the following form:

[id] dn: distinguished_name
attribute_type: attribute_value…
attribute_type: attribute_value…
…

The optional id is a number determined by the application that is used to edit the entry. Each entry can contain as many attribute_type and attribute_value pairs as needed, as long as they are all defined in a corresponding schema file. A blank line indicates the end of an entry.

14.1.1.2. OpenLDAP Features

OpenLDAP suite provides a number of important features:

LDAPv3 Support — Many of the changes in the protocol since LDAP version 2 are designed to make LDAP more secure. Among other improvements, this includes the support for Simple Authentication and Security Layer (SASL), Transport Layer Security (TLS), and Secure Sockets Layer (SSL) protocols.
LDAP Over IPC — The use of inter-process communication (IPC) enhances security by eliminating the need to communicate over a network.
IPv6 Support — OpenLDAP is compliant with Internet Protocol version 6 (IPv6), the next generation of the Internet Protocol.
LDIFv1 Support — OpenLDAP is fully compliant with LDIF version 1.
Updated C API — The current C API improves the way programmers can connect to and use LDAP directory servers.
Enhanced Standalone LDAP Server — This includes an updated access control system, thread pooling, better tools, and much more.

14.1.1.3. OpenLDAP Server Setup

The typical steps to set up an LDAP server on Fedora are as follows:

Install the OpenLDAP suite. Refer to Section 14.1.2, “Installing the OpenLDAP Suite” for more information on required packages.
Customize the configuration as described in Section 14.1.3, “Configuring an OpenLDAP Server”.
Start the slapd service as described in Section 14.1.4, “Running an OpenLDAP Server”.
Use the ldapadd utility to add entries to the LDAP directory.
Use the ldapsearch utility to verify that the slapd service is accessing the information correctly.

14.1.2. Installing the OpenLDAP Suite

The suite of OpenLDAP libraries and tools is provided by the following packages:

Table 14.1. List of OpenLDAP packages

Package	Description
openldap	A package containing the libraries necessary to run the OpenLDAP server and client applications.
openldap-clients	A package containing the command line utilities for viewing and modifying directories on an LDAP server.
openldap-servers	A package containing both the services and utilities to configure and run an LDAP server. This includes the Standalone LDAP Daemon, `slapd`.
openldap-servers-sql	A package containing the SQL support module.

Additionally, the following packages are commonly used along with the LDAP server:

Table 14.2. List of commonly installed additional LDAP packages

Package Description

nss-pam-ldapd A package containing nslcd, a local LDAP name service that allows a user to perform local LDAP queries.

Package	Description
nss-pam-ldapd	A package containing `nslcd`, a local LDAP name service that allows a user to perform local LDAP queries.
mod_authz_ldap	A package containing `mod_authz_ldap`, the LDAP authorization module for the Apache HTTP Server. This module uses the short form of the distinguished name for a subject and the issuer of the client SSL certificate to determine the distinguished name of the user within an LDAP directory. It is also capable of authorizing users based on attributes of that user's LDAP directory entry, determining access to assets based on the user and group privileges of the asset, and denying access for users with expired passwords. Note that the `mod_ssl` module is required when using the `mod_authz_ldap` module.

mod_authz_ldap

A package containing mod_authz_ldap, the LDAP authorization module for the Apache HTTP Server. This module uses the short form of the distinguished name for a subject and the issuer of the client SSL certificate to determine the distinguished name of the user within an LDAP directory. It is also capable of authorizing users based on attributes of that user's LDAP directory entry, determining access to assets based on the user and group privileges of the asset, and denying access for users with expired passwords. Note that the mod_ssl module is required when using the mod_authz_ldap module.

To install these packages, use the yum command in the following form:

yum install package…

For example, to perform the basic LDAP server installation, type the following at a shell prompt as root:

yum install openldap openldap-clients openldap-servers

Note that you must have superuser privileges (that is, you must be logged in as root) to run this command. For more information on how to install new packages in Fedora, refer to Section 4.2.4, “Installing Packages”.

14.1.2.1. Overview of OpenLDAP Server Utilities

To perform administrative tasks, the openldap-servers package installs the following utilities along with the slapd service:

Table 14.3. List of OpenLDAP server utilities

Command	Description
`slapacl`	Allows you to check the access to a list of attributes.
`slapadd`	Allows you to add entries from an LDIF file to an LDAP directory.
`slapauth`	Allows you to check a list of IDs for authentication and authorization permissions.
`slapcat`	Allows you to pull entries from an LDAP directory in the default format and save them in an LDIF file.
`slapdn`	Allows you to check a list of Distinguished Names (DNs) based on available schema syntax.
`slapindex`	Allows you to re-index the `slapd` directory based on the current content. Run this utility whenever you change indexing options in the configuration file.
`slappasswd`	Allows you to create an encrypted user password to be used with the `ldapmodify` utility, or in the `slapd` configuration file.
`slapschema`	Allows you to check the compliance of a database with the corresponding schema.
`slaptest`	Allows you to check the LDAP server configuration.

For a detailed description of these utilities and their usage, refer to the corresponding manual pages as referred to in Section 14.1.6.1, “Installed Documentation”.

Make sure the files have correct owner

Although only root can run slapadd, the slapd service runs as the ldap user. Because of this, the directory server is unable to modify any files created by slapadd. To correct this issue, after running the slapd utility, type the following at a shell prompt:

chown -R ldap:ldap /var/lib/ldap

Stop slapd before using these utilities

To preserve the data integrity, stop the slapd service before using slapadd, slapcat, or slapindex. You can do so by typing the following at a shell prompt as root:

systemctl stop slapd.service

For more information on how to start, stop, restart, and check the current status of the slapd service, refer to Section 14.1.4, “Running an OpenLDAP Server”.

14.1.2.2. Overview of OpenLDAP Client Utilities

The openldap-clients package installs the following utilities which can be used to add, modify, and delete entries in an LDAP directory:

Table 14.4. List of OpenLDAP client utilities

Command	Description
`ldapadd`	Allows you to add entries to an LDAP directory, either from a file, or from standard input. It is a symbolic link to `ldapmodify -a`.
`ldapcompare`	Allows you to compare given attribute with an LDAP directory entry.
`ldapdelete`	Allows you to delete entries from an LDAP directory.
`ldapexop`	Allows you to perform extended LDAP operations.
`ldapmodify`	Allows you to modify entries in an LDAP directory, either from a file, or from standard input.
`ldapmodrdn`	Allows you to modify the RDN value of an LDAP directory entry.
`ldappasswd`	Allows you to set or change the password for an LDAP user.
`ldapsearch`	Allows you to search LDAP directory entries.
`ldapurl`	Allows you to compose or decompose LDAP URLs.
`ldapwhoami`	Allows you to perform a `whoami` operation on an LDAP server.

With the exception of ldapsearch, each of these utilities is more easily used by referencing a file containing the changes to be made rather than typing a command for each entry to be changed within an LDAP directory. The format of such a file is outlined in the man page for each utility.

14.1.2.3. Overview of Common LDAP Client Applications

Although there are various graphical LDAP clients capable of creating and modifying directories on the server, none of them is included in Fedora. Popular applications that can access directories in a read-only mode include Mozilla Thunderbird, Evolution, or Ekiga.

14.1.3. Configuring an OpenLDAP Server

By default, the OpenLDAP configuration is stored in the /etc/openldap/ directory. The following table highlights the most important directories and files within this directory:

Table 14.5. List of OpenLDAP configuration files and directories

Path	Description
`/etc/openldap/ldap.conf`	The configuration file for client applications that use the OpenLDAP libraries. This includes `ldapadd`, `ldapsearch`, Evolution, etc.
`/etc/openldap/slapd.d/`	The directory containing the `slapd` configuration.

Note that OpenLDAP no longer reads its configuration from the /etc/openldap/slapd.conf file. Instead, it uses a configuration database located in the /etc/openldap/slapd.d/ directory. If you have an existing slapd.conf file from a previous installation, you can convert it to the new format by running the following command as root:

slaptest -f /etc/openldap/slapd.conf -F /etc/openldap/slapd.d/

The slapd configuration consists of LDIF entries organized in a hierarchical directory structure, and the recommended way to edit these entries is to use the server utilities described in Section 14.1.2.1, “Overview of OpenLDAP Server Utilities”.

Do not edit LDIF files directly

An error in an LDIF file can render the slapd service unable to start. Because of this, it is strongly advised that you avoid editing the LDIF files within the /etc/openldap/slapd.d/ directly.

14.1.3.1. Changing the Global Configuration

Global configuration options for the LDAP server are stored in the /etc/openldap/slapd.d/cn=config.ldif file. The following directives are commonly used:

olcAllows

The olcAllows directive allows you to specify which features to enable. It takes the following form:

olcAllows: feature…

It accepts a space-separated list of features as described in Table 14.6, “Available olcAllows options”. The default option is bind_v2.

Table 14.6. Available olcAllows options

Option	Description
`bind_v2`	Enables the acceptance of LDAP version 2 bind requests.
`bind_anon_cred`	Enables an anonymous bind when the Distinguished Name (DN) is empty.
`bind_anon_dn`	Enables an anonymous bind when the Distinguished Name (DN) is not empty.
`update_anon`	Enables processing of anonymous update operations.
`proxy_authz_anon`	Enables processing of anonymous proxy authorization control.

Example 14.1. Using the olcAllows directive

olcAllows: bind_v2 update_anon

olcConnMaxPending

The olcConnMaxPending directive allows you to specify the maximum number of pending requests for an anonymous session. It takes the following form:

olcConnMaxPending: number

The default option is 100.

Example 14.2. Using the olcConnMaxPending directive

olcConnMaxPending: 100

olcConnMaxPendingAuth

The olcConnMaxPendingAuth directive allows you to specify the maximum number of pending requests for an authenticated session. It takes the following form:

olcConnMaxPendingAuth: number

The default option is 1000.

Example 14.3. Using the olcConnMaxPendingAuth directive

olcConnMaxPendingAuth: 1000

olcDisallows

The olcDisallows directive allows you to specify which features to disable. It takes the following form:

olcDisallows: feature…

It accepts a space-separated list of features as described in Table 14.7, “Available olcDisallows options”. No features are disabled by default.

Table 14.7. Available olcDisallows options

Option	Description
`bind_anon`	Disables the acceptance of anonymous bind requests.
`bind_simple`	Disables the simple bind authentication mechanism.
`tls_2_anon`	Disables the enforcing of an anonymous session when the STARTTLS command is received.
`tls_authc`	Disallows the STARTTLS command when authenticated.

Example 14.4. Using the olcDisallows directive

olcDisallows: bind_anon

olcIdleTimeout

The olcIdleTimeout directive allows you to specify how many seconds to wait before closing an idle connection. It takes the following form:

olcIdleTimeout: number

This option is disabled by default (that is, set to 0).

Example 14.5. Using the olcIdleTimeout directive

olcIdleTimeout: 180

olcLogFile

The olcLogFile directive allows you to specify a file in which to write log messages. It takes the following form:

olcLogFile: file_name

The log messages are written to standard error by default.

Example 14.6. Using the olcLogFile directive

olcLogFile: /var/log/slapd.log

olcReferral

The olcReferral option allows you to specify a URL of a server to process the request in case the server is not able to handle it. It takes the following form:

olcReferral: URL

This option is disabled by default.

Example 14.7. Using the olcReferral directive

olcReferral: ldap://root.openldap.org

olcWriteTimeout

The olcWriteTimeout option allows you to specify how many seconds to wait before closing a connection with an outstanding write request. It takes the following form:

olcWriteTimeout

This option is disabled by default (that is, set to 0).

Example 14.8. Using the olcWriteTimeout directive

olcWriteTimeout: 180

14.1.3.2. Changing the Database-Specific Configuration

By default, the OpenLDAP server uses Berkeley DB (BDB) as a database back end. The configuration for this database is stored in the /etc/openldap/slapd.d/cn=config/olcDatabase={1}bdb.ldif file. The following directives are commonly used in a database-specific configuration:

olcReadOnly

The olcReadOnly directive allows you to use the database in a read-only mode. It takes the following form:

olcReadOnly: boolean

It accepts either TRUE (enable the read-only mode), or FALSE (enable modifications of the database). The default option is FALSE.

Example 14.9. Using the olcReadOnly directive

olcReadOnly: TRUE

olcRootDN

The olcRootDN directive allows you to specify the user that is unrestricted by access controls or administrative limit parameters set for operations on the LDAP directory. It takes the following form:

olcRootDN: distinguished_name

It accepts a Distinguished Name (DN). The default option is cn=Manager,dn=my-domain,dc=com.

Example 14.10. Using the olcRootDN directive

olcRootDN: cn=root,dn=example,dn=com

olcRootPW

The olcRootPW directive allows you to set a password for the user that is specified using the olcRootDN directive. It takes the following form:

olcRootPW: password

It accepts either a plain text string, or a hash. To generate a hash, use the slappaswd utility, for example:

~]$ slappaswd
New password: 
Re-enter new password: 
{SSHA}WczWsyPEnMchFf1GRTweq2q7XJcvmSxD

Example 14.11. Using the olcRootPW directive

olcRootPW: {SSHA}WczWsyPEnMchFf1GRTweq2q7XJcvmSxD

olcSuffix

The olcSuffix directive allows you to specify the domain for which to provide information. It takes the following form:

olcSuffix: domain_name

It accepts a fully qualified domain name (FQDN). The default option is dc=my-domain,dc=com.

Example 14.12. Using the olcSuffix directive

olcSuffix: dc=example,dc=com

14.1.3.3. Extending Schema

Since OpenLDAP 2.3, the /etc/openldap/slapd.d/ directory also contains LDAP definitions that were previously located in /etc/openldap/schema/. It is possible to extend the schema used by OpenLDAP to support additional attribute types and object classes using the default schema files as a guide. However, this task is beyond the scope of this chapter. For more information on this topic, refer to http://www.openldap.org/doc/admin/schema.html.

14.1.4. Running an OpenLDAP Server

This section describes how to start, stop, restart, and check the current status of the Standalone LDAP Daemon. For more information on how to manage system services in general, refer to Chapter 7, Services and Daemons.

14.1.4.1. Starting the Service

To run the slapd service, type the following at a shell prompt as root:

systemctl start slapd.service

If you want the service to start automatically at the boot time, use the following command:

systemctl enable slapd.service

Refer to Chapter 7, Services and Daemons for more information on how to configure services in Fedora.

14.1.4.2. Stopping the Service

To stop the running slapd service, type the following at a shell prompt as root:

systemctl stop slapd.service

To prevent the service from starting automatically at the boot time, type:

systemctl disable slapd.service

Refer to Chapter 7, Services and Daemons for more information on how to configure services in Fedora.

14.1.4.3. Restarting the Service

To restart the running slapd service, type the following at a shell prompt as root:

systemctl restart slapd.service

This stops the service, and then starts it again. Use this command to reload the configuration.

14.1.4.4. Checking the Service Status

To check whether the service is running, type the following at a shell prompt:

systemctl is-active slapd.service

14.1.5. Configuring a System to Authenticate Using OpenLDAP

In order to configure a system to authenticate using OpenLDAP, make sure that the appropriate packages are installed on both LDAP server and client machines. For information on how to set up the server, follow the instructions in Section 14.1.2, “Installing the OpenLDAP Suite” and Section 14.1.3, “Configuring an OpenLDAP Server”. On a client, type the following at a shell prompt as root:

yum install openldap openldap-clients nss-pam-ldapd

Chapter 8, Configuring Authentication provides detailed instructions on how to configure applications to use LDAP for authentication.

14.1.5.1. Migrating Old Authentication Information to LDAP Format

The migrationtools package provides a set of shell and Perl scripts to help you migrate authentication information into an LDAP format. To install this package, type the following at a shell prompt as root:

yum install migrationtools

This will install the scripts to the /usr/share/migrationtools/ directory. Once installed, edit the /usr/share/migrationtools/migrate_common.ph file and change the following lines to reflect the correct domain, for example:

# Default DNS domain
$DEFAULT_MAIL_DOMAIN = "example.com";

# Default base
$DEFAULT_BASE = "dc=example,dc=com";

Alternatively, you can specify the environment variables directly on the command line. For example, to run the migrate_all_online.sh script with the default base set to dc=example,dc=com, type:

export DEFAULT_BASE="dc=example,dc=com" \
/usr/share/migrationtools/migrate_all_online.sh

To decide which script to run in order to migrate the user database, refer to Table 14.8, “Commonly used LDAP migration scripts”.

Table 14.8. Commonly used LDAP migration scripts

Existing Name Service	Is LDAP Running?	Script to Use
`/etc` flat files	yes	`migrate_all_online.sh`
`/etc` flat files	no	`migrate_all_offline.sh`
NetInfo	yes	`migrate_all_netinfo_online.sh`
NetInfo	no	`migrate_all_netinfo_offline.sh`
NIS (YP)	yes	`migrate_all_nis_online.sh`
NIS (YP)	no	`migrate_all_nis_offline.sh`

For more information on how to use these scripts, refer to the README and the migration-tools.txt files in the /usr/share/doc/migrationtools-version/ directory.

14.1.6. Additional Resources

The following resources offer additional information on the Lightweight Directory Access Protocol. Before configuring LDAP on your system, it is highly recommended that you review these resources, especially the OpenLDAP Software Administrator's Guide.

14.1.6.1. Installed Documentation

The following documentation is installed with the openldap-servers package:

/usr/share/doc/openldap-servers-version/guide.html: A copy of the OpenLDAP Software Administrator's Guide.
/usr/share/doc/openldap-servers-version/README.schema: A README file containing the description of installed schema files.

Additionally, there is also a number of manual pages that are installed with the openldap, openldap-servers, and openldap-clients packages:

Client Applications

man ldapadd — Describes how to add entries to an LDAP directory.
man ldapdelete — Describes how to delete entries within an LDAP directory.
man ldapmodify — Describes how to modify entries within an LDAP directory.
man ldapsearch — Describes how to search for entries within an LDAP directory.
man ldappasswd — Describes how to set or change the password of an LDAP user.
man ldapcompare — Describes how to use the ldapcompare tool.
man ldapwhoami — Describes how to use the ldapwhoami tool.
man ldapmodrdn — Describes how to modify the RDNs of entries.

Server Applications

man slapd — Describes command line options for the LDAP server.

Administrative Applications

man slapadd — Describes command line options used to add entries to a slapd database.
man slapcat — Describes command line options used to generate an LDIF file from a slapd database.
man slapindex — Describes command line options used to regenerate an index based upon the contents of a slapd database.
man slappasswd — Describes command line options used to generate user passwords for LDAP directories.

Configuration Files

man ldap.conf — Describes the format and options available within the configuration file for LDAP clients.
man slapd-config — Describes the format and options available within the configuration directory.

14.1.6.2. Useful Websites

http://www.openldap.org/doc/admin24/: The current version of the OpenLDAP Software Administrator's Guide.
http://www.kingsmountain.com/ldapRoadmap.shtml: Jeff Hodges' LDAP Roadmap & FAQ containing links to several useful resources and emerging news concerning the LDAP protocol.
http://www.ldapman.org/articles/: A collection of articles that offer a good introduction to LDAP, including methods to design a directory tree and customizing directory structures.
http://www.padl.com/: A website of developers of several useful LDAP tools.