Product SiteDocumentation Site

8.3.3. Performing a Network Installation

The installation program is network-aware and can use network settings for a number of functions. For instance, if you boot the installer with the askmethod or repo= options, you can install Fedora from a network server using FTP, HTTP, or NFS protocols. You can also instruct the installation program to consult additional software repositories later in the process.
If you are performing a network installation, the Configure TCP/IP dialog appears. This dialog asks for your IP and other network addresses. You can choose to configure the IP address and Netmask of the device via DHCP or manually.
By default, the installation program uses DHCP to automatically provide network settings. If you use a cable or DSL modem, router, firewall, or other network hardware to communicate with the Internet, DHCP is a suitable option. If your network has no DHCP server, clear the check box labeled Use dynamic IP configuration (DHCP).
Enter the IP address you are using during installation and press Enter.
The installation program supports the IPv4 and IPv6 protocols.
TCP/IP Configuration
Configure the network device address(es) for installation.
Figure 8.5. TCP/IP Configuration

When the installation process completes, it will transfer these settings to your system.