Documentation for a newer release is available. View Latest

설치 후

This chapter describes the initial setup tools which open after you finish the installation, reboot the system, and log in for the first time.

Two separate configuration tools are part of Fedora. If you installed the GNOME desktop environment (the default Fedora environment, installed for example as part of the Fedora Workstation Edition), the GNOME Initial Setup utility will open; for all other graphical environments, the Initial Setup tool serves the same purpose.

Both of these tools will allow you to configure user-specific settings which have not been configured during the installation. Some of the settings are available both in the graphical installer (or as Kickstart commands) as well as in the initial-setup utilities; in that case, they will only be displayed after the first reboot if you skipped them during the installation. This means that, for example, if you configured a user account before the installation finished, you will not be prompted to do so again after the installation completes.

초기 설정

초기 설정 화면은 다음 상태를 충족했다고 가정하면, 로그인 전에 설치가 완료되고 처음으로 설치된 시스템이 부팅된 후에 표시됩니다:

  • 당신의 소프트웨어 선택은 그래픽 환경(예를 들면, 당신은 Fedora 웍스테이션 라이브 이미지를 이용해서 시스템을 설치했습니다)을 포함하고 있습니다.

  • 당신이 설치했던 그래픽 환경은 그놈 데스크탑 환경 [application]이 아닙니다 (그놈 초기 설정에서 설명되어지는 것과 같은 자신의 초기 설정 유틸리티를 제공합니다).

  • 초기-설정 꾸러미가 설치되었습니다.

  • 그래픽 설치자에서 사용 가능한 모든 화면이 구성되지 않습니다.

주요 초기 설정 화면. 이 예제는 모든 선택을 표시합니다; 보여지는 것이 모두는 아닙니다
Figure 1. 초기 설정

초기 설정*은 여러 시스템 설정을 구성 할 수 있도록 합니다. 이들 모두는 또한 설치 중에 구성 될 수도 있으며, 그러나 이를 완료 할 필요는 없습니다. 설치 중에 구성되지 *않은 설정만이 표시 될 것입니다; 예를 들면, 만약 설치하는 동안 비- 'root’가 사용자 계정을 생성하지 않는다면, [application]*초기 설정*은 첫 번째 재부트 후에 시작 될 것이며,그런 후에 당신은 계정을 구성 할 수 있을 것입니다. 만약 당신이 설치 중에 모든 사용 가능한 선택을 구성한 경우에, [application]*초기 설정*은 조금도 표시되지 않을 것입니다.

유틸리티에서 사용 가능한 시스템 측면으로 구성하려면, 주요 창(예를 들면, 사용자 생성)에서 사용 가능한 연결을 눌러줍니다. 각각의 연결은 분리된 옵션이 있는 화면으로 분리하도록 합니다; 이들 화면은 그래픽 설치 중에 사용 할 수 있는 동일한 것 중에 하나입니다. 만약 도움이 필요하면, 왼쪽 상단 모서리에 있는 '도움말’을 눌러서, 그창 화면에 새로운 창이 포함된 지침을 엽니다.

화면 구성을 종료 한 후에, 상단 왼쪽 모서리 부분에 '완료' 누름단추를 눌러주고, 초기 설정 메뉴로 돌아갑니다. 당신은 모든 설정 구성이 끝나면, 하단 오른쪽 모서리 부분에서 `구성 완료`를 누르고, 모든 구성된 설정을 저장합니다. 구성 유틸리티는 닫힐 것이고 당신은 시스템에 로그인 할 수 있을 것입니다.

심지어 설치 중에 이미 구성되어져 있어도, 모든 사용 가능한 선택이 표시되며 [application]*초기 설정*을 구성 할 수 있습니다. 이렇게 하려면, 설치 시작 부분에서 킥스타트 파일을 사용해야만 하고, 이 파일은 다음 명령을 포함하여야만 합니다:

# [command]firstboot --enable --reconfig#

--reconfig 옵션은 모든 선택이 표시되는 것처럼 상세화합니다. 킥스타트 설치에 대한 정보는 킥스타트를 통한 자동화된 설치를 참고하세요.

일반적으로, 종료 한 후에 [application]*초기 설정*으로 되돌아 갈 수 없으며 시스템에 로그인합니다. `root`로 다음 명령을 실행에 의하여(다음 재시작 후에, 로그인 입력기가 표시되기 전에) 다시 표시 할 수 있도록 만들 수 있습니다:

# systemctl enable initial-setup-graphical.service

그런 후에, 자신의 시스템을 재시작하세요.

그놈 초기 설정

The GNOME Initial Setup utility will be displayed after you log in for the first time with any user account, as long as your first login is in the GNOME desktop environment.

언어 선택이 표시된 그놈 초기 설정.
Figure 2. 그놈 초기 설정

This utility allows you to configure several user-specific settings, such as system language or the default keyboard layout. Use the Next and Previous buttons at the top of the window to navigate between screens. Some screens (Configure online accounts in particular) are optional and can be skipped using the Skip button in the top right corner.

After you finish configuring all screens, click Start using Fedora to exit the utility. After that, the Getting Started page from GNOME help will be displayed, and you can either browse the help content, or close it and start using your desktop.

일반적인 설치-후 작업

After you finish the installation and go through one of the initial setup utilities described above, your system is ready for use. However, other administrative tasks not covered by the installer or the initial setup utilities may still be necessary, depending on how you plan to use your system. The list below describes some of the more common tasks usually performed immediately after a new installation.

잃어버린 root 비밀번호 복구

The root password, which is configured during the installation, is required for accessing the system as the root user. Without this password you will not be able to configure your system or install additional software. If you lost or forgot your root password, you can reset it by following the steps described in Resetting the Root Password.

네트워크를 구성합니다

In most cases, network access is configured during the installation process, either in the Anaconda installation program (see Network & Hostname) or in a Kickstart file (see network (optional) - Configure Network Interfaces). For information on configuring the network after the installation, see the Fedora Networking Guide, available at http://docs.fedoraproject.org/.

초기 시스템 최신화를 수행합니다

If you installed Fedora from a full installation ISO image (such as the Workstation live image or full Server DVD), it is recommended to perform an initial system update, because your installation media likely contained older versions of software packages. During the initial update, all installed packages are updated to their latest available versions. Updates to packages provide security fixes, bug fixes and enhancements.

The DNF package manager is used for updating installed packages. For more information about updating your system with DNF, see the Fedora System Administrator’s Guide, available at http://docs.fedoraproject.org/.

드라이버 최신화 설치

Usually, drivers for system devices are already supported in the kernel provided by Red Hat Enterprise Linux. However, occasionally, support for devices that have been released recently could be missing. In these cases, a driver update enabling your device may be available.

Devices necessary to complete the installation can have driver updates provided before the installation begins. If a device is missing a driver, but it is not essential during the installation, it is recommended to wait until after the installation completes, and install additional drivers afterwards. For instructions on installing and enabling additional drivers on the installed system using RPM and DNF, see the Fedora System Administrator’s Guide, available at http://docs.fedoraproject.org/.

추가 저장소 구성

New software is installed from package repositories. Package repositories are organized sets of software and metadata that can be accessed by the DNF package manager. By default, several update repositories provided by Fedora are configured automatically and you can install updates and additional software from those. However, if you want to set up additional repositories, for example ones containing your own software, some extra steps are needed.

For information about configuring additional software repositories, see the Fedora System Administrator’s Guide, available at http://docs.fedoraproject.org/.

추가 꾸러미 설치

You can control which packages will be installed by selecting an environment in the Software Selection dialog in the graphical installation (see Software Selection). This dialog does not provide a way to choose individual packages, only predefined sets. However, you can use the DNF package manager to install additional packages after the installation. See the Fedora System Administrator’s Guide, available at http://docs.fedoraproject.org/, for more information.

그래픽 로그인 전환

Depending on the options you chose during the installation process, it is possible that your system does not have a graphical interface, instead offering only a text-based prompt. If this is the case and you wish to enable a graphical desktop after the installation, you must install the X Window System and your preferred desktop environment (either GNOME or KDE).

As with all other software, these packages can be installed using the DNF package manager. For information about using DNF to install new packages, see the Fedora System Administrator’s Guide, available at http://docs.fedoraproject.org/. For information on how to enable graphical login by default, see Booting into a Graphical Environment.