Using the Koji build system
The Koji Build System is Fedora’s RPM buildsystem.
Packagers use the
koji client to request package builds
and get information about the buildsystem.
Koji runs on top of Mock to build RPM packages for specific architectures
and ensure that they build correctly.
There is also a simplified Chinese edition.
Before using Koji to build packages,
you must have the
fedora-packager package installed:
dnf install fedora-packager
You must also have a valid kerberos ticket:
KRB5_TRACE=/dev/stdout kinit your_fas_username@FEDORAPROJECT.ORG
FEDORAPROJECT.ORG must be in capital case.
Store your FAS username (all lower case) in
This is not actually needed for Kerberos
but for other tools that use the Fedora client certificate
to determine the FAS username.
For more information, see Kerberos setup.
The global-local client configuration file for koji is
You should not need to change this from the defaults
for building Fedora packages.
These allow you to use the primary build system
as well as secondary arch build systems.
You can use the
koji command directly,
fedpkg, a script that interacts with the RPM Packaging system and other subsystems,
like git and koji itself.
When building with
fedpkg within a git repository,
every push is automatically tagged via git.
All you have to do to build the package is to run
This triggers a build request for the branch.
It is also possible to target a specific koji tag:
fedpkg build --target TARGET
if building on rawhide
against a side-tag for updating API for many packages,
use the following:
fedpkg build --target 'dist-f14-python'
|chain-builds only work when building on rawhide. To chain-build packages to update a released OS version, set up an override using bodhi requesting packages to be included in the proper buildroot.|
Sometimes you want to make sure that one build has succeeded before launching the next one, for example when you want to rebuild a package against a dependency that has just been rebuilt. In that case, use a chain build with:
fedpkg chain-build libwidget libgizmo
The current package is added to the end of the CHAIN list.
:) can be used in the CHAIN parameter to define groups of packages.
Packages in any single group will be built in parallel
and all packages in a group must build successfully
and populate the repository
before the next group will begin building.
fedpkg chain-build libwidget libaselib : libgizmo :
libaselib to be built in parallel,
and then the package in your current directory.
If no groups are defined,
packages will be built sequentially.
If a build fails, following builds are canceled, but the builds that already succeeded are pushed to the repository.
Sometimes it is useful to be able to build a package against the buildroot without actually including it in the release. This is called a scratch build.
The following section covers using koji directly, as well as the fedpkg tool, to do scratch builds.
To create a scratch build from changes you haven’t committed, do the following:
rpmbuild -bs foo.spec koji build --scratch rawhide foo.srpm
From the latest git commit:
koji build --scratch rawhide 'git url'
If you have committed the changes to git
and you are in the current branch,
you can do a scratch build with
which wraps the koji command line tool with the appropriate options:
To run a scratch build for a specific architecture:
fedpkg scratch-build --arches <archs>
`<archs>`can be a comma separated list of several architectures.
Finally, it is possible to combine the scratch-build command with a specific koji tag in the form:
fedpkg scratch-build --target TARGET
fedpkg scratch-build --help or
koji build --help for more information.
If your package fails to build, you get an error, for example:
420066 buildArch kernel-2.6.18-1.2739.10.9.el5.jjf.215394.2.src.rpm, ia64): open (build-1.example.com) -> FAILED: BuildrootError: error building package (arch ia64), mock exited with status 10
Investigate why the build failed by looking at the log files.
If there is a
build.log, start there.
Otherwise, look at
Each job you successfully start gets a unique task ID, which is listed in its output.
Logs can be found in the web interface,
in the Task pages for the failed task.
koji watch-log, along with the task ID,
to view the logs.
See the help output for more details.
We’ve tried to make Koji self-documenting wherever possible.
The command line tool prints a list of valid commands,
and each command supports
--help. For example:
$ koji help Koji commands are: build Build a package from source cancel-task Cancel a task help List available commands latest-build Print the latest rpms for a tag latest-pkg Print the latest builds for a tag [...]
$ koji build --help usage: koji build [options] tag URL (Specify the --help global option for a list of other help options) options: -h, --help show this help message and exit --skip-tag Do not attempt to tag package --scratch Perform a scratch build --nowait Don't wait on the build [...]
koji can be used to replicate a build root for local debugging.
koji mock-config --help Usage: koji mock-config [options] name (Specify the --help global option for a list of other help options) Options: -h, --help show this help message and exit --arch=ARCH Specify the arch --tag=TAG Create a mock config for a tag --task=TASK Duplicate the mock config of a previous task --buildroot=BUILDROOT Duplicate the mock config for the specified buildroot id --mockdir=DIR Specify mockdir --topdir=DIR Specify topdir --topurl=URL url under which Koji files are accessible --distribution=DISTRIBUTION Change the distribution macro -o FILE Output to a file
For example to get the latest buildroot for
koji mock-config --tag dist-f12-build --arch=x86_64 --topurl=http://kojipkgs.fedoraproject.org/ dist-f12
You must pass
--topurl=http://kojipkgs.fedoraproject.org/ to any mock-config command
to get a working mock-config from Fedora’s koji.
List only tasks requested by you:
koji list-tasks --mine
requeue an already-processed task (general syntax is:
koji resubmit [options] taskID):
koji resubmit 3
Instead of using the
you can also directly use the command line tool,
To build a package, the syntax is:
koji build <build target> <git URL>
koji build dist-f14 'git url'
The koji build command creates a build task in Koji.
By default, the tool will wait and print status updates until the build completes.
You can override this with the
|For fedora koji, the git url MUST be based on pkgs.fedoraproject.org. Other arbitrary git repos cannot be used for builds.|
In Koji, it is sometimes necessary to distinguish between a package in general, a specific build of a package, and the various rpm files created by a build. When precision is needed, these terms should be interpreted as follows:
Package: The name of a source rpm. This refers to the package in general and not any particular build or subpackage. For example: kernel, glibc, etc.
Build: A particular build of a package. This refers to the entire build: all arches and subpackages. For example: kernel-2.6.9-34.EL, glibc-2.3.4-2.19.
RPM: A particular rpm. A specific arch and subpackage of a build. For example: kernel-2.6.9-34.EL.x86_64, kernel-devel-2.6.9-34.EL.s390, glibc-2.3.4-2.19.i686, glibc-common-2.3.4-2.19.ia64
Koji organizes packages using tags. In Koji a tag is roughly a collection of packages:
Tags support inheritance
Each tag has its own list of valid packages (inheritable)
Package ownership can be set per-tag (inheritable)
When you build you specify a target rather than a tag
A build target specifies where a package should be built and how it should be tagged afterward. This allows target names to remain fixed as tags change through releases.
You can get a full list of build targets with the following command:
$ koji list-targets
You can see just a single target with the
$ koji list-targets --name f30 Name Buildroot Destination --------------------------------------------------------------------------------------------- f30 f30-build f30-pending
This tells you a build for target
will use a buildroot with packages from the
and tag the resulting packages as f30-pending.
You probably do not want to build against rawhide.
If Fedora N is the latest one out,
to build to the next one, choose
As mentioned above,
each tag has its own list of packages that may be placed in the tag.
To see that list for a tag, use the
$ koji list-pkgs --tag dist-f14
The first column is the name of the package, the second tells you which tag the package entry has been inherited from, and the third tells you the owner of the package.