Setup a device by using Ignition and the Simplified Provisioner

You have created an Ignition configuration file and is accessible via HTTP/HTTPS.

You have downloaded the Simplified Provisioner ISO image and booted the device from it by using one of the methods described in Booting the Simplified Provisioner.

Select "Install Fedora 40" and press the "[e]" key to edit the menu entry.

Make sure the installation device variable (coreos.inst.install_dev) is correct and append the ignition parameters (e.g.: coreos.inst.append=ignition.config.url=http://192.168.122.1/fiot.ign coreos.inst.append=rd.neednet=1) to the linux line if not present (e.g.:):

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Install Fedora 40' --class fedora --class gnu-linux --class gnu --class os {
	linux  images/pxeboot/vmlinuz rd.neednet=1 coreos.inst.crypt_root=1 coreos.inst.isoroot=Fedora-40-IoT-x86_64 coreos.inst.install_dev=/dev/vda coreos.inst.image_file=/run/media/iso/image.raw.xz coreos.inst.insecure quiet coreos.inst.append=ignition.config.url=http://192.168.122.1/fiot.ign coreos.inst.append=rd.neednet=1
	initrd images/pxeboot/initrd.img
}

Boot the menu entry by pressing "[Ctrl-x]" to boot and install the IoT device