System Monitoring Tools
Viewing System Processes
Using the ps Command
The ps command allows you to display information about running processes. It produces a static list, that is, a snapshot of what is running when you execute the command. If you want a constantly updated list of running processes, use the top command or the System Monitor application instead.
To list all processes that are currently running on the system including processes owned by other users, type the following at a shell prompt:
ps ax
For each listed process, the ps ax command displays the process ID (PID
), the terminal that is associated with it (TTY
), the current status (STAT
), the cumulated CPU time (TIME
), and the name of the executable file (COMMAND
). For example:
~]$ ps ax
PID TTY STAT TIME COMMAND
1 ? Ss 0:02 /usr/lib/systemd/systemd --system --deserialize 20
2 ? S 0:00 [kthreadd]
3 ? S 0:00 [ksoftirqd/0]
5 ? S 0:00 [kworker/u:0]
6 ? S 0:00 [migration/0]
[output truncated]
To display the owner alongside each process, use the following command:
ps aux
Apart from the information provided by the ps ax command, ps aux displays the effective username of the process owner (USER
), the percentage of the CPU (%CPU
) and memory (%MEM
) usage, the virtual memory size in kilobytes (VSZ
), the non-swapped physical memory size in kilobytes (RSS
), and the time or date the process was started. For instance:
~]$ ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.3 53128 2988 ? Ss 13:28 0:02 /usr/lib/systemd/systemd --system --deserialize 20
root 2 0.0 0.0 0 0 ? S 13:28 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S 13:28 0:00 [ksoftirqd/0]
root 5 0.0 0.0 0 0 ? S 13:28 0:00 [kworker/u:0]
root 6 0.0 0.0 0 0 ? S 13:28 0:00 [migration/0]
[output truncated]
You can also use the ps command in a combination with grep to see if a particular process is running. For example, to determine if Emacs is running, type:
~]$ ps ax | grep emacs
2625 ? Sl 0:00 emacs
For a complete list of available command line options, refer to the ps(1) manual page.
Using the top Command
The top command displays a real-time list of processes that are running on the system. It also displays additional information about the system uptime, current CPU and memory usage, or total number of running processes, and allows you to perform actions such as sorting the list or killing a process.
To run the top command, type the following at a shell prompt:
top
For each listed process, the top command displays the process ID (PID
), the effective username of the process owner (USER
), the priority (PR
), the nice value (NI
), the amount of virtual memory the process uses (VIRT
), the amount of non-swapped physical memory the process uses (RES
), the amount of shared memory the process uses (SHR
), the percentage of the CPU (%CPU
) and memory (%MEM
) usage, the cumulated CPU time (TIME+
), and the name of the executable file (COMMAND
). For example:
~]$ top top - 19:22:08 up 5:53, 3 users, load average: 1.08, 1.03, 0.82 Tasks: 117 total, 2 running, 115 sleeping, 0 stopped, 0 zombie Cpu(s): 9.3%us, 1.3%sy, 0.0%ni, 85.1%id, 0.0%wa, 1.7%hi, 0.0%si, 2.6%st Mem: 761956k total, 617256k used, 144700k free, 24356k buffers Swap: 1540092k total, 55780k used, 1484312k free, 256408k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 510 john 20 0 1435m 99m 18m S 9.0 13.3 3:30.52 gnome-shell 32686 root 20 0 156m 27m 3628 R 2.0 3.7 0:48.69 Xorg 2625 john 20 0 488m 27m 14m S 0.3 3.7 0:00.70 emacs 1 root 20 0 53128 2640 1152 S 0.0 0.3 0:02.83 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.01 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.18 ksoftirqd/0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.30 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper 10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs 11 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns 12 root 20 0 0 0 0 S 0.0 0.0 0:00.11 sync_supers 13 root 20 0 0 0 0 S 0.0 0.0 0:00.00 bdi-default 14 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kintegrityd 15 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
Interactive top commands contains useful interactive commands that you can use with top. For more information, refer to the top(1) manual page.
Command | Description |
---|---|
Enter, Space |
Immediately refreshes the display. |
h, ? |
Displays a help screen. |
k |
Kills a process. You are prompted for the process ID and the signal to send to it. |
n |
Changes the number of displayed processes. You are prompted to enter the number. |
u |
Sorts the list by user. |
M |
Sorts the list by memory usage. |
P |
Sorts the list by CPU usage. |
q |
Terminates the utility and returns to the shell prompt. |
Using the System Monitor Tool
The Processes
tab of the System Monitor tool allows you to view, search for, change the priority of, and kill processes from the graphical user interface.
To start the System Monitor tool, either select gnome-system-monitor at a shell prompt. Then click the Processes
tab to view the list of running processes.
For each listed process, the System Monitor tool displays its name (Process Name
), user (User
), percentage of the CPU usage (% CPU
), process ID (ID
), memory usage (Memory
), total disk read and write (Disk read total
and Disk write total
), current disk read and write (Disk read
and Disk write
), and prioritiy (Priority
). To sort the information by a specific column in ascending order, click the name of that column. Click the name of the column again to toggle the sort between ascending and descending order.
By default, the System Monitor tool displays a list of processes that are owned by the current user. Selecting various options from the View menu allows you to:
-
view only active processes,
-
view all processes,
-
view your processes,
-
view process dependencies,
-
view a memory map of a selected process,
-
view the files opened by a selected process, and
-
refresh the list of processes.
Additionally, various options in the Edit menu allows you to:
-
stop a process,
-
continue running a stopped process,
-
end a process,
-
kill a process,
-
change the priority of a selected process, and
-
edit the System Monitor preferences, such as the refresh interval for the list of processes, or what information to show.
You can also end a process by selecting it from the list and clicking the End Process button.
Viewing Memory Usage
Using the free Command
The free command allows you to display the amount of free and used memory on the system. To do so, type the following at a shell prompt:
free
The free command provides information about both the physical memory (Mem
) and swap space (Swap
). It displays the total amount of memory (total
), as well as the amount of memory that is in use (used
), free (free
), shared (shared
), in kernel buffers (buffers
), and cached (cached
). For example:
~]$ free total used free shared buffers cached Mem: 761956 607500 154456 0 37404 156176 -/+ buffers/cache: 413920 348036 Swap: 1540092 84408 1455684
By default, free displays the values in kilobytes. To display the values in megabytes, supply the -m
command line option:
free -m
For instance:
~]$ free -m total used free shared buffers cached Mem: 744 593 150 0 36 152 -/+ buffers/cache: 404 339 Swap: 1503 82 1421
For a complete list of available command line options, refer to the free(1) manual page.
Using the System Monitor Tool
The Resources
tab of the System Monitor tool allows you to view the amount of free and used memory on the system.
To start the System Monitor tool, either select gnome-system-monitor at a shell prompt. Then click the Resources
tab to view the system’s memory usage.
In the Memory and Swap History
section, the System Monitor tool displays a graphical representation of the memory and swap usage history, as well as the total amount of the physical memory (Memory
) and swap space (Swap
) and how much of it is in use.
Viewing CPU Usage
Using the System Monitor Tool
The Resources
tab of the System Monitor tool allows you to view the current CPU usage on the system.
To start the System Monitor tool, either select gnome-system-monitor at a shell prompt. Then click the Resources
tab to view the system’s CPU usage.
In the CPU History
section, the System Monitor tool displays a graphical representation of the CPU usage history and shows the percentage of how much CPU is currently in use.
Viewing Block Devices and File Systems
Using the lsblk Command
The lsblk command allows you to display a list of available block devices. To do so, type the following at a shell prompt:
lsblk
For each listed block device, the lsblk command displays the device name (NAME
), major and minor device number (MAJ:MIN
), if the device is removable (RM
), what is its size (SIZE
), if the device is read-only (RO
), what type is it (TYPE
), and where the device is mounted (MOUNTPOINT
). For example:
~]$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom vda 252:0 0 20G 0 disk |-vda1 252:1 0 500M 0 part /boot `-vda2 252:2 0 19.5G 0 part |-vg_fedora-lv_swap (dm-0) 253:0 0 1.5G 0 lvm [SWAP] `-vg_fedora-lv_root (dm-1) 253:1 0 18G 0 lvm /
By default, lsblk lists block devices in a tree-like format. To display the information as an ordinary list, add the -l
command line option:
lsblk -l
For instance:
~]$ lsblk -l NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom vda 252:0 0 20G 0 disk vda1 252:1 0 500M 0 part /boot vda2 252:2 0 19.5G 0 part vg_fedora-lv_swap (dm-0) 253:0 0 1.5G 0 lvm [SWAP] vg_fedora-lv_root (dm-1) 253:1 0 18G 0 lvm /
For a complete list of available command line options, refer to the lsblk(8) manual page.
Using the blkid Command
The blkid command allows you to display information about available block devices. To do so, type the following at a shell prompt as root
:
blkid
For each listed block device, the blkid command displays available attributes such as its universally unique identifier (UUID
), file system type (TYPE
), or volume label (LABEL
). For example:
~]# blkid /dev/vda1: UUID="4ea24c68-ab10-47d4-8a6b-b8d3a002acba" TYPE="ext4" /dev/vda2: UUID="iJ9YwJ-leFf-A1zb-VVaK-H9t1-raLW-HoqlUG" TYPE="LVM2_member" /dev/mapper/vg_fedora-lv_swap: UUID="d6d755bc-3e3e-4e8f-9bb5-a5e7f4d86ffd" TYPE="swap" /dev/mapper/vg_fedora-lv_root: LABEL="_Fedora-17-x86_6" UUID="77ba9149-751a-48e0-974f-ad94911734b9" TYPE="ext4"
By default, the lsblk command lists all available block devices. To display information about a particular device only, specify the device name on the command line:
blkid device_name
For instance, to display information about /dev/vda1
, type:
~]# blkid /dev/vda1 /dev/vda1: UUID="4ea24c68-ab10-47d4-8a6b-b8d3a002acba" TYPE="ext4"
You can also use the above command with the -p
and -o udev
command line options to obtain more detailed information. Note that root
privileges are required to run this command:
blkid -po udev device_name
For example:
~]# blkid -po udev /dev/vda1 ID_FS_UUID=4ea24c68-ab10-47d4-8a6b-b8d3a002acba ID_FS_UUID_ENC=4ea24c68-ab10-47d4-8a6b-b8d3a002acba ID_FS_VERSION=1.0 ID_FS_TYPE=ext4 ID_FS_USAGE=filesystem ID_PART_ENTRY_SCHEME=dos ID_PART_ENTRY_TYPE=0x83 ID_PART_ENTRY_FLAGS=0x80 ID_PART_ENTRY_NUMBER=1 ID_PART_ENTRY_OFFSET=2048 ID_PART_ENTRY_SIZE=1024000 ID_PART_ENTRY_DISK=252:0
For a complete list of available command line options, refer to the blkid(8) manual page.
Using the partx Command
The partx command allows you to display a list of disk partitions. To list the partition table of a particular disk, as root
, run this command with the -s
option followed by the device name:
partx -s device_name
For example, to list partitions on /dev/vda
, type:
~]# partx -s /dev/vda NR START END SECTORS SIZE NAME UUID 1 2048 1026047 1024000 500M 2 1026048 41943039 40916992 19.5G
For a complete list of available command line options, refer to the partx(8) manual page.
Using the findmnt Command
The findmnt command allows you to display a list of currently mounted file systems. To do so, type the following at a shell prompt:
findmnt
For each listed file system, the findmnt command displays the target mount point (TARGET
), source device (SOURCE
), file system type (FSTYPE
), and relevant mount options (OPTIONS
). For example:
~]$ findmnt TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/vg_fedora-lv_root ext4 rw,relatime,seclabel,data=o |-/proc proc proc rw,nosuid,nodev,noexec,rela | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=23,pgrp=1,ti |-/sys sysfs sysfs rw,nosuid,nodev,noexec,rela | |-/sys/kernel/security securityfs security rw,nosuid,nodev,noexec,rela | |-/sys/fs/selinux selinuxfs selinuxf rw,relatime | |-/sys/fs/cgroup tmpfs tmpfs rw,nosuid,nodev,noexec,secl | | |-/sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/cpuset cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/cpu,cpuacct cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/memory cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/devices cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/freezer cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/net_cls cgroup cgroup rw,nosuid,nodev,noexec,rela | | |-/sys/fs/cgroup/blkio cgroup cgroup rw,nosuid,nodev,noexec,rela | | `-/sys/fs/cgroup/perf_event cgroup cgroup rw,nosuid,nodev,noexec,rela | |-/sys/kernel/debug debugfs debugfs rw,relatime | `-/sys/kernel/config configfs configfs rw,relatime [output truncated]
By default, findmnt lists file systems in a tree-like format. To display the information as an ordinary list, add the -l
command line option:
findmnt -l
For instance:
~]$ findmnt -l TARGET SOURCE FSTYPE OPTIONS /proc proc proc rw,nosuid,nodev,noexec,relatime /sys sysfs sysfs rw,nosuid,nodev,noexec,relatime,s /dev devtmpfs devtmpfs rw,nosuid,seclabel,size=370080k,n /dev/pts devpts devpts rw,nosuid,noexec,relatime,seclabe /dev/shm tmpfs tmpfs rw,nosuid,nodev,seclabel /run tmpfs tmpfs rw,nosuid,nodev,seclabel,mode=755 / /dev/mapper/vg_fedora-lv_root ext4 rw,relatime,seclabel,data=ordered /sys/kernel/security securityfs security rw,nosuid,nodev,noexec,relatime /sys/fs/selinux selinuxfs selinuxf rw,relatime /sys/fs/cgroup tmpfs tmpfs rw,nosuid,nodev,noexec,seclabel,m /sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,relatime,r [output truncated]
You can also choose to list only file systems of a particular type. To do so, add the -t
command line option followed by a file system type:
findmnt -t
type
For example, to all list ext4
file systems, type:
~]$ findmnt -t ext4 TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/vg_fedora-lv_root ext4 rw,relatime,seclabel,data=ordered /boot /dev/vda1 ext4 rw,relatime,seclabel,data=ordered
For a complete list of available command line options, refer to the findmnt(8) manual page.
Using the df Command
The df command allows you to display a detailed report on the system’s disk space usage. To do so, type the following at a shell prompt:
df
For each listed file system, the df command displays its name (Filesystem
), size (1K-blocks
or Size
), how much space is used (Used
), how much space is still available (Available
), the percentage of space usage (Use%
), and where is the file system mounted (Mounted on
). For example:
~]$ df Filesystem 1K-blocks Used Available Use% Mounted on rootfs 18877356 4605476 14082844 25% / devtmpfs 370080 0 370080 0% /dev tmpfs 380976 256 380720 1% /dev/shm tmpfs 380976 3048 377928 1% /run /dev/mapper/vg_fedora-lv_root 18877356 4605476 14082844 25% / tmpfs 380976 0 380976 0% /sys/fs/cgroup tmpfs 380976 0 380976 0% /media /dev/vda1 508745 85018 398127 18% /boot
By default, the df command shows the partition size in 1 kilobyte blocks and the amount of used and available disk space in kilobytes. To view the information in megabytes and gigabytes, supply the -h
command line option, which causes df to display the values in a human-readable format:
df -h
For instance:
~]$ df -h Filesystem Size Used Avail Use% Mounted on rootfs 19G 4.4G 14G 25% / devtmpfs 362M 0 362M 0% /dev tmpfs 373M 256K 372M 1% /dev/shm tmpfs 373M 3.0M 370M 1% /run /dev/mapper/vg_fedora-lv_root 19G 4.4G 14G 25% / tmpfs 373M 0 373M 0% /sys/fs/cgroup tmpfs 373M 0 373M 0% /media /dev/vda1 497M 84M 389M 18% /boot
Note that the /dev/shm
entry represents the system’s virtual memory file system, /sys/fs/cgroup
is a cgroup file system, and /run
contains information about the running system.
For a complete list of available command line options, refer to the df(1) manual page.
Using the du Command
The du command allows you to displays the amount of space that is being used by files in a directory. To display the disk usage for each of the subdirectories in the current working directory, run the command with no additional command line options:
du
For example:
~]$ du
8 ./.gconf/apps/gnome-terminal/profiles/Default
12 ./.gconf/apps/gnome-terminal/profiles
16 ./.gconf/apps/gnome-terminal
[output truncated]
460 ./.gimp-2.6
68828 .
By default, the du command displays the disk usage in kilobytes. To view the information in megabytes and gigabytes, supply the -h
command line option, which causes the utility to display the values in a human-readable format:
du -h
For instance:
~]$ du -h
8.0K ./.gconf/apps/gnome-terminal/profiles/Default
12K ./.gconf/apps/gnome-terminal/profiles
16K ./.gconf/apps/gnome-terminal
[output truncated]
460K ./.gimp-2.6
68M .
At the end of the list, the du command always shows the grand total for the current directory. To display only this information, supply the -s
command line option:
du -sh
For example:
~]$ du -sh
68M .
For a complete list of available command line options, refer to the du(1) manual page.
Using the System Monitor Tool
The File Systems
tab of the System Monitor tool allows you to view file systems and disk space usage in the graphical user interface.
To start the System Monitor tool, either select gnome-system-monitor at a shell prompt. Then click the File Systems
tab to view a list of file systems.
For each listed file system, the System Monitor tool displays the source device (Device
), target mount point (Directory
), and file system type (Type
), as well as its size (Total
) and how much space is free (Free
), available (Available
), and used (Used
).
Viewing Hardware Information
Using the lspci Command
The lspci command lists all PCI devices that are present in the system:
lspci
For example:
~]$ lspci 00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller 00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) [output truncated]
You can also use the -v
command line option to display more verbose output, or -vv
for very verbose output:
lspci-v
|-vv
For instance, to determine the manufacturer, model, and memory size of a system’s video card, type:
~]$ lspci -v
[output truncated]
01:00.0 VGA compatible controller: nVidia Corporation G84 [Quadro FX 370] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 0491
Physical Slot: 2
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f0000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at 1100 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
[output truncated]
For a complete list of available command line options, refer to the lspci(8) manual page.
Using the lsusb Command
The lsusb command allows you to display information about USB buses and devices that are attached to them. To list all USB devices that are in the system, type the following at a shell prompt:
lsusb
This displays a simple list of devices, for example:
~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[output truncated]
Bus 001 Device 002: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Bus 008 Device 002: ID 03f0:2c24 Hewlett-Packard Logitech M-UAL-96 Mouse
Bus 008 Device 003: ID 04b3:3025 IBM Corp.
You can also use the -v
command line option to display more verbose output:
lsusb -v
For instance:
~]$ lsusb -v
[output truncated]
Bus 008 Device 002: ID 03f0:2c24 Hewlett-Packard Logitech M-UAL-96 Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x03f0 Hewlett-Packard
idProduct 0x2c24 Logitech M-UAL-96 Mouse
bcdDevice 31.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
[output truncated]
For a complete list of available command line options, refer to the lsusb(8) manual page.
Using the lspcmcia Command
The lspcmcia command allows you to list all PCMCIA devices that are present in the system. To do so, type the following at a shell prompt:
lspcmcia
For example:
~]$ lspcmcia Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:15:00.0)
You can also use the -v
command line option to display more verbose information, or -vv
to increase the verbosity level even further:
lspcmcia-v
|-vv
For instance:
~]$ lspcmcia -v Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:15:00.0) Configuration: state: on ready: unknown
For a complete list of available command line options, refer to the pccardctl(8) manual page.
Using the lscpu Command
The lscpu command allows you to list information about CPUs that are present in the system, including the number of CPUs, their architecture, vendor, family, model, CPU caches, etc. To do so, type the following at a shell prompt:
lscpu
For example:
~]$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 7 CPU MHz: 1998.000 BogoMIPS: 4999.98 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 3072K NUMA node0 CPU(s): 0-3
For a complete list of available command line options, refer to the lscpu(1) manual page.
Using the Hardware probe
The hw-probe command allows you to list all hardware devices, perform sanity tests for some of them and submit result to the hardware database. To do so, type the following at a shell prompt:
hw-probe -all -upload
For example:
~]$ hw-probe -all -upload Probe for hardware ... Ok Reading logs ... Ok Uploaded to DB, Thank you! Probe URL: https://linux-hardware.org/?probe=c84b37d646
Monitoring Performance with Net-SNMP
Fedora Rawhide includes the Net-SNMP software suite, which includes a flexible and extensible Simple Network Management Protocol (SNMP) agent. This agent and its associated utilities can be used to provide performance data from a large number of systems to a variety of tools which support polling over the SNMP protocol.
This section provides information on configuring the Net-SNMP agent to securely provide performance data over the network, retrieving the data using the SNMP protocol, and extending the SNMP agent to provide custom performance metrics.
Installing Net-SNMP
The Net-SNMP software suite is available as a set of RPM packages in the Fedora software distribution. Available Net-SNMP packages summarizes each of the packages and their contents.
Package | Provides |
---|---|
net-snmp |
The SNMP Agent Daemon and documentation. This package is required for exporting performance data. |
net-snmp-libs |
The |
net-snmp-utils |
SNMP clients such as snmpget and snmpwalk. This package is required in order to query a system’s performance data over SNMP. |
net-snmp-perl |
The mib2c utility and the |
net-snmp-python |
An SNMP client library for Python. |
To install any of these packages, use the dnf command in the following form:
dnf install
package…
For example, to install the SNMP Agent Daemon and SNMP clients used in the rest of this section, type the following at a shell prompt:
~]# dnf install net-snmp net-snmp-libs net-snmp-utils
Note that you must have superuser privileges (that is, you must be logged in as root
) to run this command. For more information on how to install new packages in Fedora, refer to Installing Packages.
Running the Net-SNMP Daemon
The net-snmp package contains snmpd
, the SNMP Agent Daemon. This section provides information on how to start, stop, and restart the snmpd
service, and shows how to enable or disable it in the multi-user
target unit. For more information on the concept of target units and how to manage system services in Fedora in general, refer to Services and Daemons.
Starting the Service
To run the snmpd
service in the current session, type the following at a shell prompt as root
:
systemctlstart
snmpd.service
To configure the service to be automatically started at boot time, use the following command:
systemctlenable
snmpd.service
This will enable the service in the multi-user
target unit.
Stopping the Service
To stop the running snmpd
service, type the following at a shell prompt as root
:
systemctlstop
snmpd.service
To disable starting the service at boot time, use the following command:
systemctldisable
snmpd.service
This will disable the service in the multi-user
target unit.
Restarting the Service
To restart the running snmpd
service, type the following at a shell prompt:
systemctlrestart
snmpd.service
This will stop the service and start it again in quick succession. To only reload the configuration without stopping the service, run the following command instead:
systemctlreload
snmpd.service
This will cause the running snmpd
service to reload the configuration.
Configuring Net-SNMP
To change the Net-SNMP Agent Daemon configuration, edit the /etc/snmp/snmpd.conf
configuration file. The default snmpd.conf
file shipped with Fedora Rawhide is heavily commented and serves as a good starting point for agent configuration.
This section focuses on two common tasks: setting system information and configuring authentication. For more information about available configuration directives, refer to the snmpd.conf(5) manual page. Additionally, there is a utility in the net-snmp package named snmpconf which can be used to interactively generate a valid agent configuration.
Note that the net-snmp-utils package must be installed in order to use the snmpwalk utility described in this section.
Applying the changes
For any changes to the configuration file to take effect, force the systemctl |
Setting System Information
Net-SNMP provides some rudimentary system information via the system
tree. For example, the following snmpwalk command shows the system
tree with a default agent configuration.
~]# snmpwalk -v2c -c public localhost system SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.32-122.el6.x86_64 #1 SMP Wed Mar 9 23:54:34 EST 2011 x86_64 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (99554) 0:16:35.54 SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmp.local.conf) SNMPv2-MIB::sysName.0 = STRING: localhost.localdomain SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf)
By default, the sysName
object is set to the hostname. The sysLocation
and sysContact
objects can be configured in the /etc/snmp/snmpd.conf
file by changing the value of the syslocation
and syscontact
directives, for example:
syslocation Datacenter, Row 3, Rack 2 syscontact UNIX Admin <admin@example.com>
After making changes to the configuration file, reload the configuration and test it by running the snmpwalk command again:
~]# systemct reload snmpd.service ~]# snmpwalk -v2c -c public localhost system SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.32-122.el6.x86_64 #1 SMP Wed Mar 9 23:54:34 EST 2011 x86_64 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (158357) 0:26:23.57 SNMPv2-MIB::sysContact.0 = STRING: UNIX Admin <admin@example.com> SNMPv2-MIB::sysName.0 = STRING: localhost.localdomain SNMPv2-MIB::sysLocation.0 = STRING: Datacenter, Row 3, Rack 2
Configuring Authentication
The Net-SNMP Agent Daemon supports all three versions of the SNMP protocol. The first two versions (1 and 2c) provide for simple authentication using a community string. This string is a shared secret between the agent and any client utilities. The string is passed in clear text over the network however and is not considered secure. Version 3 of the SNMP protocol supports user authentication and message encryption using a variety of protocols. The Net-SNMP agent also supports tunneling over SSH, TLS authentication with X.509 certificates, and Kerberos authentication.
To configure an SNMP version 2c community, use either the rocommunity
or rwcommunity
directive in the /etc/snmp/snmpd.conf
configuration file. The format of the directives is the following:
directive community source OID
… where community is the community string to use, source is an IP address or subnet, and OID is the SNMP tree to provide access to. For example, the following directive provides read-only access to the system
tree to a client using the community string “redhat” on the local machine:
rocommunity redhat 127.0.0.1 .1.3.6.1.2.1.1
To test the configuration, use the snmpwalk command with the -v
and -c
options.
~]# snmpwalk -v2c -c redhat localhost system SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.32-122.el6.x86_64 #1 SMP Wed Mar 9 23:54:34 EST 2011 x86_64 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (158357) 0:26:23.57 SNMPv2-MIB::sysContact.0 = STRING: UNIX Admin <admin@example.com> SNMPv2-MIB::sysName.0 = STRING: localhost.localdomain SNMPv2-MIB::sysLocation.0 = STRING: Datacenter, Row 3, Rack 2
To configure an SNMP version 3 user, use the net-snmp-create-v3-user command. This command adds entries to the /var/lib/net-snmp/snmpd.conf
and /etc/snmp/snmpd.conf
files which create the user and grant access to the user. Note that the net-snmp-create-v3-user command may only be run when the agent is not running. The following example creates the “sysadmin” user with the password “redhatsnmp”:
~]# systemctl stop snmpd.service ~]# net-snmp-create-v3-user Enter a SNMPv3 user name to create: admin Enter authentication pass-phrase: redhatsnmp Enter encryption pass-phrase: [press return to reuse the authentication pass-phrase] adding the following line to /var/lib/net-snmp/snmpd.conf: createUser admin MD5 "redhatsnmp" DES adding the following line to /etc/snmp/snmpd.conf: rwuser admin ~]# systemctl start snmpd.service
The rwuser
directive (or rouser
when the -ro
command line option is supplied) that net-snmp-create-v3-user adds to /etc/snmp/snmpd.conf
has a similar format to the rwcommunity
and rocommunity
directives:
directive usernoauth
|auth
|priv
OID
… where user is a username and OID is the SNMP tree to provide access to. By default, the Net-SNMP Agent Daemon allows only authenticated requests (the auth
option). The noauth
option allows you to permit unauthenticated requests, and the priv
option enforces the use of encryption. The authpriv
option specifies that requests must be authenticated and replies should be encrypted.
For example, the following line grants the user “admin” read-write access to the entire tree:
rwuser admin authpriv .1
To test the configuration, create a .snmp
directory in your user’s home directory and a configuration file named snmp.conf
in that directory (~/.snmp/snmp.conf
) with the following lines:
defVersion 3 defSecurityLevel authPriv defSecurityName admin defPassphrase redhatsnmp
The snmpwalk command will now use these authentication settings when querying the agent:
~]$ snmpwalk -v3 localhost system SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.32-122.el6.x86_64 #1 SMP Wed Mar 9 23:54:34 EST 2011 x86_64 [output truncated]
Retrieving Performance Data over SNMP
The Net-SNMP Agent in Fedora provides a wide variety of performance information over the SNMP protocol. In addition, the agent can be queried for a listing of the installed RPM packages on the system, a listing of currently running processes on the system, or the network configuration of the system.
This section provides an overview of OIDs related to performance tuning available over SNMP. It assumes that the net-snmp-utils package is installed and that the user is granted access to the SNMP tree as described in Configuring Authentication.
Hardware Configuration
The Host Resources MIB
included with Net-SNMP presents information about the current hardware and software configuration of a host to a client utility. Available OIDs summarizes the different OIDs available under that MIB.
OID | Description |
---|---|
|
Contains general system information such as uptime, number of users, and number of running processes. |
|
Contains data on memory and file system usage. |
|
Contains a listing of all processors, network devices, and file systems. |
|
Contains a listing of all running processes. |
|
Contains memory and CPU statistics on the process table from HOST-RESOURCES-MIB::hrSWRun. |
|
Contains a listing of the RPM database. |
There are also a number of SNMP tables available in the Host Resources MIB which can be used to retrieve a summary of the available information. The following example displays HOST-RESOURCES-MIB::hrFSTable
:
~]$ snmptable -Cb localhost HOST-RESOURCES-MIB::hrFSTable
SNMP table: HOST-RESOURCES-MIB::hrFSTable
Index MountPoint RemoteMountPoint Type
Access Bootable StorageIndex LastFullBackupDate LastPartialBackupDate
1 "/" "" HOST-RESOURCES-TYPES::hrFSLinuxExt2
readWrite true 31 0-1-1,0:0:0.0 0-1-1,0:0:0.0
5 "/dev/shm" "" HOST-RESOURCES-TYPES::hrFSOther
readWrite false 35 0-1-1,0:0:0.0 0-1-1,0:0:0.0
6 "/boot" "" HOST-RESOURCES-TYPES::hrFSLinuxExt2
readWrite false 36 0-1-1,0:0:0.0 0-1-1,0:0:0.0
For more information about HOST-RESOURCES-MIB
, see the /usr/share/snmp/mibs/HOST-RESOURCES-MIB.txt
file.
CPU and Memory Information
Most system performance data is available in the UCD SNMP MIB
. The systemStats
OID provides a number of counters around processor usage:
~]$ snmpwalk localhost UCD-SNMP-MIB::systemStats
UCD-SNMP-MIB::ssIndex.0 = INTEGER: 1
UCD-SNMP-MIB::ssErrorName.0 = STRING: systemStats
UCD-SNMP-MIB::ssSwapIn.0 = INTEGER: 0 kB
UCD-SNMP-MIB::ssSwapOut.0 = INTEGER: 0 kB
UCD-SNMP-MIB::ssIOSent.0 = INTEGER: 0 blocks/s
UCD-SNMP-MIB::ssIOReceive.0 = INTEGER: 0 blocks/s
UCD-SNMP-MIB::ssSysInterrupts.0 = INTEGER: 29 interrupts/s
UCD-SNMP-MIB::ssSysContext.0 = INTEGER: 18 switches/s
UCD-SNMP-MIB::ssCpuUser.0 = INTEGER: 0
UCD-SNMP-MIB::ssCpuSystem.0 = INTEGER: 0
UCD-SNMP-MIB::ssCpuIdle.0 = INTEGER: 99
UCD-SNMP-MIB::ssCpuRawUser.0 = Counter32: 2278
UCD-SNMP-MIB::ssCpuRawNice.0 = Counter32: 1395
UCD-SNMP-MIB::ssCpuRawSystem.0 = Counter32: 6826
UCD-SNMP-MIB::ssCpuRawIdle.0 = Counter32: 3383736
UCD-SNMP-MIB::ssCpuRawWait.0 = Counter32: 7629
UCD-SNMP-MIB::ssCpuRawKernel.0 = Counter32: 0
UCD-SNMP-MIB::ssCpuRawInterrupt.0 = Counter32: 434
UCD-SNMP-MIB::ssIORawSent.0 = Counter32: 266770
UCD-SNMP-MIB::ssIORawReceived.0 = Counter32: 427302
UCD-SNMP-MIB::ssRawInterrupts.0 = Counter32: 743442
UCD-SNMP-MIB::ssRawContexts.0 = Counter32: 718557
UCD-SNMP-MIB::ssCpuRawSoftIRQ.0 = Counter32: 128
UCD-SNMP-MIB::ssRawSwapIn.0 = Counter32: 0
UCD-SNMP-MIB::ssRawSwapOut.0 = Counter32: 0
In particular, the ssCpuRawUser
, ssCpuRawSystem
, ssCpuRawWait
, and ssCpuRawIdle
OIDs provide counters which are helpful when determining whether a system is spending most of its processor time in kernel space, user space, or I/O. ssRawSwapIn
and ssRawSwapOut
can be helpful when determining whether a system is suffering from memory exhaustion.
More memory information is available under the UCD-SNMP-MIB::memory
OID, which provides similar data to the free command:
~]$ snmpwalk localhost UCD-SNMP-MIB::memory
UCD-SNMP-MIB::memIndex.0 = INTEGER: 0
UCD-SNMP-MIB::memErrorName.0 = STRING: swap
UCD-SNMP-MIB::memTotalSwap.0 = INTEGER: 1023992 kB
UCD-SNMP-MIB::memAvailSwap.0 = INTEGER: 1023992 kB
UCD-SNMP-MIB::memTotalReal.0 = INTEGER: 1021588 kB
UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 634260 kB
UCD-SNMP-MIB::memTotalFree.0 = INTEGER: 1658252 kB
UCD-SNMP-MIB::memMinimumSwap.0 = INTEGER: 16000 kB
UCD-SNMP-MIB::memBuffer.0 = INTEGER: 30760 kB
UCD-SNMP-MIB::memCached.0 = INTEGER: 216200 kB
UCD-SNMP-MIB::memSwapError.0 = INTEGER: noError(0)
UCD-SNMP-MIB::memSwapErrorMsg.0 = STRING:
Load averages are also available in the UCD SNMP MIB
. The SNMP table UCD-SNMP-MIB::laTable
has a listing of the 1, 5, and 15 minute load averages:
~]$ snmptable localhost UCD-SNMP-MIB::laTable
SNMP table: UCD-SNMP-MIB::laTable
laIndex laNames laLoad laConfig laLoadInt laLoadFloat laErrorFlag laErrMessage
1 Load-1 0.00 12.00 0 0.000000 noError
2 Load-5 0.00 12.00 0 0.000000 noError
3 Load-15 0.00 12.00 0 0.000000 noError
File System and Disk Information
The Host Resources MIB
provides information on file system size and usage. Each file system (and also each memory pool) has an entry in the HOST-RESOURCES-MIB::hrStorageTable
table:
~]$ snmptable -Cb localhost HOST-RESOURCES-MIB::hrStorageTable
SNMP table: HOST-RESOURCES-MIB::hrStorageTable
Index Type Descr
AllocationUnits Size Used AllocationFailures
1 HOST-RESOURCES-TYPES::hrStorageRam Physical memory
1024 Bytes 1021588 388064 ?
3 HOST-RESOURCES-TYPES::hrStorageVirtualMemory Virtual memory
1024 Bytes 2045580 388064 ?
6 HOST-RESOURCES-TYPES::hrStorageOther Memory buffers
1024 Bytes 1021588 31048 ?
7 HOST-RESOURCES-TYPES::hrStorageOther Cached memory
1024 Bytes 216604 216604 ?
10 HOST-RESOURCES-TYPES::hrStorageVirtualMemory Swap space
1024 Bytes 1023992 0 ?
31 HOST-RESOURCES-TYPES::hrStorageFixedDisk /
4096 Bytes 2277614 250391 ?
35 HOST-RESOURCES-TYPES::hrStorageFixedDisk /dev/shm
4096 Bytes 127698 0 ?
36 HOST-RESOURCES-TYPES::hrStorageFixedDisk /boot
1024 Bytes 198337 26694 ?
The OIDs under HOST-RESOURCES-MIB::hrStorageSize
and HOST-RESOURCES-MIB::hrStorageUsed
can be used to calculate the remaining capacity of each mounted file system.
I/O data is available both in UCD-SNMP-MIB::systemStats
(ssIORawSent.0
and ssIORawRecieved.0
) and in UCD-DISKIO-MIB::diskIOTable
. The latter provides much more granular data. Under this table are OIDs for diskIONReadX
and diskIONWrittenX
, which provide counters for the number of bytes read from and written to the block device in question since the system boot:
~]$ snmptable -Cb localhost UCD-DISKIO-MIB::diskIOTable
SNMP table: UCD-DISKIO-MIB::diskIOTable
Index Device NRead NWritten Reads Writes LA1 LA5 LA15 NReadX NWrittenX
...
25 sda 216886272 139109376 16409 4894 ? ? ? 216886272 139109376
26 sda1 2455552 5120 613 2 ? ? ? 2455552 5120
27 sda2 1486848 0 332 0 ? ? ? 1486848 0
28 sda3 212321280 139104256 15312 4871 ? ? ? 212321280 139104256
Network Information
Information on network devices is provided by the Interfaces MIB. IF-MIB::ifTable
provides an SNMP table with an entry for each interface on the system, the configuration of the interface, and various packet counters for the interface. The following example shows the first few columns of ifTable
on a system with two physical network interfaces:
~]$ snmptable -Cb localhost IF-MIB::ifTable
SNMP table: IF-MIB::ifTable
Index Descr Type Mtu Speed PhysAddress AdminStatus
1 lo softwareLoopback 16436 10000000 up
2 eth0 ethernetCsmacd 1500 0 52:54:0:c7:69:58 up
3 eth1 ethernetCsmacd 1500 0 52:54:0:a7:a3:24 down
Network traffic is available under the OIDs IF-MIB::ifOutOctets
and IF-MIB::ifInOctets
. The following SNMP queries will retrieve network traffic for each of the interfaces on this system:
~]$ snmpwalk localhost IF-MIB::ifDescr IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth0 IF-MIB::ifDescr.3 = STRING: eth1 ~]$ snmpwalk localhost IF-MIB::ifOutOctets IF-MIB::ifOutOctets.1 = Counter32: 10060699 IF-MIB::ifOutOctets.2 = Counter32: 650 IF-MIB::ifOutOctets.3 = Counter32: 0 ~]$ snmpwalk localhost IF-MIB::ifInOctets IF-MIB::ifInOctets.1 = Counter32: 10060699 IF-MIB::ifInOctets.2 = Counter32: 78650 IF-MIB::ifInOctets.3 = Counter32: 0
Extending Net-SNMP
The Net-SNMP Agent can be extended to provide application metrics in addition to raw system metrics. This allows for capacity planning as well as performance issue troubleshooting. For example, it may be helpful to know that an email system had a 5-minute load average of 15 while being tested, but it is more helpful to know that the email system has a load average of 15 while processing 80,000 messages a second. When application metrics are available via the same interface as the system metrics, this also allows for the visualization of the impact of different load scenarios on system performance (for example, each additional 10,000 messages increases the load average linearly until 100,000).
A number of the applications that ship with Fedora extend the Net-SNMP Agent to provide application metrics over SNMP. There are several ways to extend the agent for custom applications as well. This section describes extending the agent with shell scripts and Perl plug-ins. It assumes that the net-snmp-utils and net-snmp-perl packages are installed, and that the user is granted access to the SNMP tree as described in Configuring Authentication.
Extending Net-SNMP with Shell Scripts
The Net-SNMP Agent provides an extension MIB (NET-SNMP-EXTEND-MIB
) that can be used to query arbitrary shell scripts. To specify the shell script to run, use the extend
directive in the /etc/snmp/snmpd.conf
file. Once defined, the Agent will provide the exit code and any output of the command over SNMP. The example below demonstrates this mechanism with a script which determines the number of httpd
processes in the process table.
Using the proc directive
The Net-SNMP Agent also provides a built-in mechanism for checking the process table via the |
The exit code of the following shell script is the number of httpd processes running on the system at a given point in time:
#!/bin/sh NUMPIDS=`pgrep httpd | wc -l` exit $NUMPIDS
To make this script available over SNMP, copy the script to a location on the system path, set the executable bit, and add an extend
directive to the /etc/snmp/snmpd.conf
file. The format of the extend
directive is the following:
extend
name prog args
… where name is an identifying string for the extension, prog is the program to run, and args are the arguments to give the program. For instance, if the above shell script is copied to /usr/local/bin/check_apache.sh
, the following directive will add the script to the SNMP tree:
extend httpd_pids /bin/sh /usr/local/bin/check_apache.sh
The script can then be queried at NET-SNMP-EXTEND-MIB::nsExtendObjects
:
~]$ snmpwalk localhost NET-SNMP-EXTEND-MIB::nsExtendObjects NET-SNMP-EXTEND-MIB::nsExtendNumEntries.0 = INTEGER: 1 NET-SNMP-EXTEND-MIB::nsExtendCommand."httpd_pids" = STRING: /bin/sh NET-SNMP-EXTEND-MIB::nsExtendArgs."httpd_pids" = STRING: /usr/local/bin/check_apache.sh NET-SNMP-EXTEND-MIB::nsExtendInput."httpd_pids" = STRING: NET-SNMP-EXTEND-MIB::nsExtendCacheTime."httpd_pids" = INTEGER: 5 NET-SNMP-EXTEND-MIB::nsExtendExecType."httpd_pids" = INTEGER: exec(1) NET-SNMP-EXTEND-MIB::nsExtendRunType."httpd_pids" = INTEGER: run-on-read(1) NET-SNMP-EXTEND-MIB::nsExtendStorage."httpd_pids" = INTEGER: permanent(4) NET-SNMP-EXTEND-MIB::nsExtendStatus."httpd_pids" = INTEGER: active(1) NET-SNMP-EXTEND-MIB::nsExtendOutput1Line."httpd_pids" = STRING: NET-SNMP-EXTEND-MIB::nsExtendOutputFull."httpd_pids" = STRING: NET-SNMP-EXTEND-MIB::nsExtendOutNumLines."httpd_pids" = INTEGER: 1 NET-SNMP-EXTEND-MIB::nsExtendResult."httpd_pids" = INTEGER: 8 NET-SNMP-EXTEND-MIB::nsExtendOutLine."httpd_pids".1 = STRING:
Note that the exit code (“8” in this example) is provided as an INTEGER type and any output is provided as a STRING type. To expose multiple metrics as integers, supply different arguments to the script using the extend
directive. For example, the following shell script can be used to determine the number of processes matching an arbitrary string, and will also output a text string giving the number of processes:
#!/bin/sh PATTERN=$1 NUMPIDS=`pgrep $PATTERN | wc -l` echo "There are $NUMPIDS $PATTERN processes." exit $NUMPIDS
The following /etc/snmp/snmpd.conf
directives will give both the number of httpd
PIDs as well as the number of snmpd
PIDs when the above script is copied to /usr/local/bin/check_proc.sh
:
extend httpd_pids /bin/sh /usr/local/bin/check_proc.sh httpd extend snmpd_pids /bin/sh /usr/local/bin/check_proc.sh snmpd
The following example shows the output of an snmpwalk of the nsExtendObjects
OID:
~]$ snmpwalk localhost NET-SNMP-EXTEND-MIB::nsExtendObjects NET-SNMP-EXTEND-MIB::nsExtendNumEntries.0 = INTEGER: 2 NET-SNMP-EXTEND-MIB::nsExtendCommand."httpd_pids" = STRING: /bin/sh NET-SNMP-EXTEND-MIB::nsExtendCommand."snmpd_pids" = STRING: /bin/sh NET-SNMP-EXTEND-MIB::nsExtendArgs."httpd_pids" = STRING: /usr/local/bin/check_proc.sh httpd NET-SNMP-EXTEND-MIB::nsExtendArgs."snmpd_pids" = STRING: /usr/local/bin/check_proc.sh snmpd NET-SNMP-EXTEND-MIB::nsExtendInput."httpd_pids" = STRING: NET-SNMP-EXTEND-MIB::nsExtendInput."snmpd_pids" = STRING: ... NET-SNMP-EXTEND-MIB::nsExtendResult."httpd_pids" = INTEGER: 8 NET-SNMP-EXTEND-MIB::nsExtendResult."snmpd_pids" = INTEGER: 1 NET-SNMP-EXTEND-MIB::nsExtendOutLine."httpd_pids".1 = STRING: There are 8 httpd processes. NET-SNMP-EXTEND-MIB::nsExtendOutLine."snmpd_pids".1 = STRING: There are 1 snmpd processes.
Integer exit codes are limited
Integer exit codes are limited to a range of 0–255. For values that are likely to exceed 256, either use the standard output of the script (which will be typed as a string) or a different method of extending the agent. |
This last example shows a query for the free memory of the system and the number of httpd
processes. This query could be used during a performance test to determine the impact of the number of processes on memory pressure:
~]$ snmpget localhost \ 'NET-SNMP-EXTEND-MIB::nsExtendResult."httpd_pids"' \ UCD-SNMP-MIB::memAvailReal.0 NET-SNMP-EXTEND-MIB::nsExtendResult."httpd_pids" = INTEGER: 8 UCD-SNMP-MIB::memAvailReal.0 = INTEGER: 799664 kB
Extending Net-SNMP with Perl
Executing shell scripts using the extend
directive is a fairly limited method for exposing custom application metrics over SNMP. The Net-SNMP Agent also provides an embedded Perl interface for exposing custom objects. The net-snmp-perl package provides the NetSNMP::agent
Perl module that is used to write embedded Perl plug-ins on Fedora.
The NetSNMP::agent
Perl module provides an agent
object which is used to handle requests for a part of the agent’s OID tree. The agent
object’s constructor has options for running the agent as a sub-agent of snmpd
or a standalone agent. No arguments are necessary to create an embedded agent:
use NetSNMP::agent (':all'); my $agent = new NetSNMP::agent();
The agent
object has a register
method which is used to register a callback function with a particular OID. The register
function takes a name, OID, and pointer to the callback function. The following example will register a callback function named hello_handler
with the SNMP Agent which will handle requests under the OID .1.3.6.1.4.1.8072.9999.9999
:
$agent->register("hello_world", ".1.3.6.1.4.1.8072.9999.9999", \&hello_handler);
Obtaining a root OID
The OID |
The handler function will be called with four parameters, HANDLER
, REGISTRATION_INFO
, REQUEST_INFO
, and REQUESTS
. The REQUESTS
parameter contains a list of requests in the current call and should be iterated over and populated with data. The request
objects in the list have get and set methods which allow for manipulating the OID
and value
of the request. For example, the following call will set the value of a request object to the string “hello world”:
$request->setValue(ASN_OCTET_STR, "hello world");
The handler function should respond to two types of SNMP requests: the GET request and the GETNEXT request. The type of request is determined by calling the getMode
method on the request_info
object passed as the third parameter to the handler function. If the request is a GET request, the caller will expect the handler to set the value
of the request
object, depending on the OID of the request. If the request is a GETNEXT request, the caller will also expect the handler to set the OID of the request to the next available OID in the tree. This is illustrated in the following code example:
my $request; my $string_value = "hello world"; my $integer_value = "8675309"; for($request = $requests; $request; $request = $request->next()) { my $oid = $request->getOID(); if ($request_info->getMode() == MODE_GET) { if ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.0")) { $request->setValue(ASN_OCTET_STR, $string_value); } elsif ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.1")) { $request->setValue(ASN_INTEGER, $integer_value); } } elsif ($request_info->getMode() == MODE_GETNEXT) { if ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.0")) { $request->setOID(".1.3.6.1.4.1.8072.9999.9999.1.1"); $request->setValue(ASN_INTEGER, $integer_value); } elsif ($oid < new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.0")) { $request->setOID(".1.3.6.1.4.1.8072.9999.9999.1.0"); $request->setValue(ASN_OCTET_STR, $string_value); } } }
When getMode
returns MODE_GET
, the handler analyzes the value of the getOID
call on the request
object. The value
of the request
is set to either string_value
if the OID ends in “.1.0”, or set to integer_value
if the OID ends in “.1.1”. If the getMode
returns MODE_GETNEXT
, the handler determines whether the OID of the request is “.1.0”, and then sets the OID and value for “.1.1”. If the request is higher on the tree than “.1.0”, the OID and value for “.1.0” is set. This in effect returns the “next” value in the tree so that a program like snmpwalk can traverse the tree without prior knowledge of the structure.
The type of the variable is set using constants from NetSNMP::ASN
. See the perldoc for NetSNMP::ASN
for a full list of available constants.
The entire code listing for this example Perl plug-in is as follows:
#!/usr/bin/perl use NetSNMP::agent (':all'); use NetSNMP::ASN qw(ASN_OCTET_STR ASN_INTEGER); sub hello_handler { my ($handler, $registration_info, $request_info, $requests) = @_; my $request; my $string_value = "hello world"; my $integer_value = "8675309"; for($request = $requests; $request; $request = $request->next()) { my $oid = $request->getOID(); if ($request_info->getMode() == MODE_GET) { if ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.0")) { $request->setValue(ASN_OCTET_STR, $string_value); } elsif ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.1")) { $request->setValue(ASN_INTEGER, $integer_value); } } elsif ($request_info->getMode() == MODE_GETNEXT) { if ($oid == new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.0")) { $request->setOID(".1.3.6.1.4.1.8072.9999.9999.1.1"); $request->setValue(ASN_INTEGER, $integer_value); } elsif ($oid < new NetSNMP::OID(".1.3.6.1.4.1.8072.9999.9999.1.0")) { $request->setOID(".1.3.6.1.4.1.8072.9999.9999.1.0"); $request->setValue(ASN_OCTET_STR, $string_value); } } } } my $agent = new NetSNMP::agent(); $agent->register("hello_world", ".1.3.6.1.4.1.8072.9999.9999", \&hello_handler);
To test the plug-in, copy the above program to /usr/share/snmp/hello_world.pl
and add the following line to the /etc/snmp/snmpd.conf
configuration file:
perl do "/usr/share/snmp/hello_world.pl"
The SNMP Agent Daemon will need to be restarted to load the new Perl plug-in. Once it has been restarted, an snmpwalk should return the new data:
~]$ snmpwalk localhost NET-SNMP-MIB::netSnmpPlaypen
NET-SNMP-MIB::netSnmpPlaypen.1.0 = STRING: "hello world"
NET-SNMP-MIB::netSnmpPlaypen.1.1 = INTEGER: 8675309
The snmpget should also be used to exercise the other mode of the handler:
~]$ snmpget localhost \ NET-SNMP-MIB::netSnmpPlaypen.1.0 \ NET-SNMP-MIB::netSnmpPlaypen.1.1 NET-SNMP-MIB::netSnmpPlaypen.1.0 = STRING: "hello world" NET-SNMP-MIB::netSnmpPlaypen.1.1 = INTEGER: 8675309
Additional Resources
To learn more about gathering system information, refer to the following resources.
Installed Documentation
-
ps(1) — The manual page for the ps command.
-
top(1) — The manual page for the top command.
-
free(1) — The manual page for the free command.
-
df(1) — The manual page for the df command.
-
du(1) — The manual page for the du command.
-
lspci(8) — The manual page for the lspci command.
-
snmpd(8) — The manual page for the
snmpd
service. -
snmpd.conf(5) — The manual page for the
/etc/snmp/snmpd.conf
file containing full documentation of available configuration directives.
Want to help? Learn how to contribute to Fedora Docs ›